Deck board quantity calculator

Deck / Quantity

Estimate board rows and full boards from your deck and board dimensions.

Enter project dimensions

A worked rectangular-deck example is loaded and calculated automatically. Replace it with your project dimensions.

ft
Boards run along this dimension.
ft
Boards are counted across this dimension.
in
Enter the installed face width, not the nominal label.
ft
Enter the full board length. Cut layout and offcut reuse are not optimized.
in
Required input. Check the selected product’s installation guide; there is no universal default.
%
Optional. Leave blank to use 0%; enter an allowance appropriate to your layout.

About this calculator

Board quantity counts rows across a rectangular deck from actual board face width and the entered gap, then counts full board lengths and applies the entered waste allowance.

Steps

  1. Deck length

    Enter deck length in feet.

  2. Deck width

    Enter deck width in feet.

  3. Actual board width

    Enter actual board width in inches.

  4. Board length

    Enter board length in feet.

  5. Board-to-board gap

    Enter board-to-board gap in inches.

  6. Waste allowance

    Enter waste allowance as a percentage. See the formula for how it is applied.

Formula

ceil((deck width in inches + gap) ÷ (actual board width + gap)) × ceil(deck length ÷ board length), then apply waste and round up

Notation: ceil rounds up to the next whole number.

Interpret the result

The net count and purchase count are different when waste is entered. The allowance is a user input, and the estimate does not reuse offcuts between rows.

Worked example

Across 144 in, ceil((144 + 0.1875) ÷ (5.5 + 0.1875)) = 26 rows. Each 16-ft row takes one board: 26 × 1.10 = 28.6, rounded up to 29 purchase boards.

Example result: 29 boards

Example inputs
Deck length
16 ft
Deck width
12 ft
Actual board width
5.5 in
Board length
16 ft
Board-to-board gap
0.1875 in
Waste allowance
10 %

FAQs

Are gaps counted beyond the last board?

No. The row formula counts gaps between adjacent boards, not an extra gap at the outside edge.

Does this include a purchase allowance?

Only allowances shown in the inputs and formula are applied. If no waste, reserve, or package field is listed, the result does not infer one.

Does this make a complete construction or product plan?

No. It calculates the listed quantities from known inputs; it does not select structural dimensions, product compatibility, or code requirements.

Example limits

A 0.47-ft width is 5.64 in, just wider than one 5.5-in board. With zero gap and no waste allowance, the model needs two rows and two 8-ft boards; cutting and offcut reuse are not optimized.