Fence cost calculator

Fence / Cost

Estimate a straight-run fence budget from length and a local rate.

Enter your project inputs

A worked project example is loaded and calculated automatically. Replace the length and local rate with your own quote.

ft
Measure the total straight run.
Choose the scope shown by your supplier price or written estimate.
USD / ft
Use a supplier or quoted rate for this project. Confirm what it includes; fixed or minimum charges are not added automatically.

About this calculator

A first fence budget is the measured run multiplied by a unit price you supply, with a separate choice for materials-only or installed scope.

Steps

  1. Fence length

    Enter fence length in feet.

  2. Price per linear foot

    Enter the price or rate in US dollars per ft. Use a supplier price or quote for the scope you are comparing.

  3. Rate scope

    Choose whether the entered rate covers materials only or an installed service.

Formula

fence length × user-supplied price per linear foot

Interpret the result

The total reflects the entered rate scope. It does not add gates, tax, permits, disposal, minimum charges, or other work unless the rate includes them.

Worked example

A 100-ft run × an entered $1 per linear ft = $100.00. The $1 rate is an arithmetic example, not a market price.

Example result: $100.00

Example inputs
Fence length
100 ft
Price per linear foot
1 USD / ft
Rate scope
Materials only

FAQs

Does “installed service” add labor automatically?

No. It labels the entered rate scope; all included work must already be reflected in that rate.

Are these typical US prices?

No. Enter prices from your supplier or local quote. The example prices only demonstrate the calculation.

What is included in the total?

Only the quantities, rates, and explicit charges listed in the calculator. Check your quote scope to avoid omitting or counting an included item twice.

Example limits

A positive 1-ft run at an explicitly entered $0 per ft returns $0. Blank or negative rates and zero or negative run lengths are rejected; the rate still needs an explicit scope.