Trex deck board gap reference
Look up Trex 2026 installation gaps by temperature and joint condition. The reference is specific to the cited Trex guide.
About this calculator
This is a product-specific reference lookup. Choose the measured installation temperature and the joint condition rather than treating one gap as universal.
Steps
- Installation temperatureInstallation temperature (available in another mode)
Enter installation temperature in degrees Fahrenheit.
- Joint conditionJoint condition (available in another mode)
Choose the option that matches your project.
Formula
Manufacturer table lookup by installation temperature and joint condition.
Interpret the result
The result is only the matching row encoded for the stated reference. It does not select fasteners, ventilation details, or values for other products.
Worked example
For the entered 70°F temperature and end-to-end joint condition, the lookup returns 1/8 in. A different joint condition can return a different value.
Example result: End-to-end gap: 1/8 in
The guide does not specify end-to-end, end-to-side, or abutting gaps at exactly 40°F. Those lookups have no reference value at that temperature; the side-to-side minimum remains available.
Example inputs
- Installation temperature
- 70 °F
- Joint condition
- Board ends or end-to-side
FAQs
What value applies at exactly 40°F?
The side-to-side minimum remains 3/16 in. The guide does not specify end-to-end, end-to-side, or abutting gaps at that temperature.
Can I use this value for any decking product?
No. This lookup is limited to the product and conditions stated on the page. Check the instructions for the exact product and joint condition.
What happens at an unlisted threshold?
The calculator leaves an undefined branch unresolved rather than selecting a value that is not present in its lookup.
Sources
These references explain the product-specific values used on this page. Use measurements and product details for your project.
Trex Decking Installation Guide
Applies to Trex decking only. Side-to-side minimum gap is 3/16 in in hot and cold installations; end and abutting gaps depend on installation temperature.
Used for the product-specific gap lookup on this page. It does not provide a universal gap or board-count formula for other products.
Additional examples and limits
Joint and site conditions
This is a Trex-specific reference lookup with temperature measured at installation in °F. The side-to-side minimum is 3/16 in in hot and cold conditions. Heavily wooded areas call for a larger 3/8-in gap; airflow guidance also discusses increasing to 3/8 in, and the product instructions set 1/2 in as the maximum. These site conditions are not selected automatically.
For end-to-end and end-to-side joints, the encoded lookup returns 1/8 in above 40°F and 3/16 in below 40°F; abutting a solid object returns 1/4 in above and 1/2 in below. The exact 40°F branch is unspecified, so those lookups are rejected at that temperature. The side-to-side minimum remains available.
Fastener placement establishes the product's designated joint gap. This reference does not select a fastener or assess ventilation, and its values do not apply to other products.
