Deck board linear footage calculator
Estimate board linear footage from measured deck area and effective board coverage.
About this calculator
Linear footage estimates the total run of boards needed to cover a measured area using actual board width, the gap, and an optional allowance.
Steps
- Deck areaDeck area (available in another mode)
Enter deck area in square feet.
- Actual board widthActual board width (available in another mode)
Enter actual board width in inches.
- Board-to-board gapBoard-to-board gap (available in another mode)
Enter board-to-board gap in inches.
- Waste allowanceWaste allowance (available in another mode)
Enter waste allowance as a percentage. See the formula for how it is applied.
Formula
deck area in square feet × 12 ÷ (actual board width + gap, both in inches) × (1 + waste percentage ÷ 100)
Interpret the result
This is aggregate board length, not a count of stock boards or a cut plan. Convert it to a purchase quantity only after choosing stock lengths and a layout.
Worked example
Effective coverage is 5.5 + 0.1875 = 5.6875 in per board line. 100 × 12 ÷ 5.6875 × 1.10 = 232.1 linear ft after display rounding.
Example result: 232.1 linear ft
Example inputs
- Deck area
- 100 sq ft
- Actual board width
- 5.5 in
- Board-to-board gap
- 0.1875 in
- Waste allowance
- 10 %
FAQs
Does linear footage account for stock lengths?
No. It estimates aggregate board length; stock selection and cut reuse are separate tasks.
Does this include a purchase allowance?
Only allowances shown in the inputs and formula are applied. If no waste, reserve, or package field is listed, the result does not infer one.
Does this make a complete construction or product plan?
No. It calculates the listed quantities from known inputs; it does not select structural dimensions, product compatibility, or code requirements.
