Deck stair rise and run calculator
Calculate equal riser height, tread count, and horizontal run for a straight stair with a selected riser count.
About this calculator
For a straight stair with equal rises and runs, the selected riser count divides total rise and determines one fewer tread.
Steps
- Total stair riseTotal stair rise (available in another mode)
Enter total stair rise in inches.
- Selected riser countSelected riser count (available in another mode)
Use a whole number.
- Horizontal run per treadHorizontal run per tread (available in another mode)
Enter horizontal run per tread in inches.
Formula
rise per riser = total rise ÷ selected risers; treads = risers − 1; total horizontal run = treads × horizontal run per tread. The run excludes nosing.
Interpret the result
Total horizontal run multiplies the tread count by the entered horizontal run per tread; it excludes nosing and does not select stair dimensions.
Worked example
42 in total rise ÷ 7 selected risers = 6 in per riser. There are 7 − 1 = 6 treads, so 6 × 10 in = 60 in total run.
Example result: 6 in rise
Example inputs
- Total stair rise
- 42 in
- Selected riser count
- 7 risers
- Horizontal run per tread
- 10 in
FAQs
Does total run include nosing?
No. It multiplies tread count by the entered horizontal run per tread, excluding nosing.
What do the layout marks refer to?
Use the stated origin, centerline or face reference, and units shown with the result. Display rounding may differ from the internal coordinates.
Does this approve the selected dimensions or product?
No. It lays out the dimensions you enter and does not establish structural capacity, product cutting permission, or installation compliance.
Additional examples and limits
Straight stair rise and run
With 42 in total rise, 7 selected risers and a 10 in horizontal run per tread: 42 ÷ 7 = 6 in per riser; 7 − 1 = 6 treads; 6 × 10 = 60 in total horizontal run. The horizontal run excludes nosing.
Boundary: 12 in total rise, 2 selected risers and a 10 in run gives 6 in per riser, 1 tread and 10 in total run. The model assumes equal risers and runs, with the top tread down. It does not select the riser count, model landings, lay out stringer cuts, or establish code compliance or structural adequacy.
