Deck rim joist calculator
Calculate rim member runs from a known run or a rectangular deck length and rim option.
About this calculator
Rim footage counts the selected edge runs at a known length, or derives inner and outer runs from a rectangular deck length.
Steps
- Rim inputRim input (available in another mode)
Choose the option that matches your project.
- Deck run lengthDeck run length (available in another mode)
Enter deck run length in feet.
- Rim edge runsRim edge runs (available in another mode)
Use a whole number.
- Deck lengthDeck length (available in another mode)
Enter deck length in feet.
- Rim optionRim option (available in another mode)
Choose the option that matches your project.
Formula
known mode: rim linear feet = selected edge runs × known run length; rectangle mode: rim linear feet = selected inner/outer/both edge runs × deck length
Interpret the result
Runs and footage describe the chosen edges only. The tool does not size rim members or decide which edges a deck needs.
Worked example
Two selected 16-ft runs require 2 × 16 = 32 linear ft.
Example result: 2 runs / 32 linear ft
Example inputs
- Rim input
- Known run length
- Deck run length
- 16 ft
- Rim edge runs
- 2 runs
FAQs
What does “both” mean?
It counts the two selected rim runs at the entered known run length or deck length.
Does this include a purchase allowance?
Only allowances shown in the inputs and formula are applied. If no waste, reserve, or package field is listed, the result does not infer one.
Does this make a complete construction or product plan?
No. It calculates the listed quantities from known inputs; it does not select structural dimensions, product compatibility, or code requirements.
Additional examples and limits
Rim option from a rectangular deck
For a 16-ft deck length, Inner or Outer gives one 16-ft rim run; Both gives two runs and 32 linear ft; None gives zero runs. Known-run mode remains useful when the selected run length has already been measured or comes from a non-rectangular layout.
This tool counts selected rim members and linear footage. It does not select rim size, joist depth, ledger replacement, overhang, slope, load or code requirements.
