Deck joist cut length calculator

Deck / Quantity

Estimate joist cut length from deck width and selected rim thickness deductions. Overhang and support offsets are not inferred.

Enter your inputs

A worked project example is loaded and calculated automatically. Replace the values with your project inputs.

ft
Enter deck width in feet.
Choose the option that matches your project.
in
Enter rim joist thickness in inches.
Limits and notes

Deck width is the overall dimension along the joist cut direction, before the selected rim deductions. Bearer set-in changes support position and is not an additional cut-length deduction. End-joist set-in for decking overhang is a different layout measurement. This tool subtracts only the selected actual rim thicknesses; it does not account for joist overhang, ledger geometry, or structural sizing. Very small positive lengths use scientific notation when decimal rounding would show zero; this is a mathematical result, not a construction recommendation.

About this calculator

Cut length starts from the overall deck width along the joist direction and subtracts only the actual rim thicknesses selected in the form.

Steps

  1. Deck width

    Enter deck width in feet.

  2. Rim joist edges

    Choose the option that matches your project.

  3. Rim joist thickness

    Enter rim joist thickness in inches.

Formula

joist cut length = deck width − selected rim edge count × actual rim thickness ÷ 12

Interpret the result

The result is a geometric cut length under the chosen rim option. Other offsets or structural requirements are outside this calculation.

Worked example

Twelve feet is 144 in. Two 1.5-in rim deductions leave 141 in, or 141 ÷ 12 = 11.75 ft.

Example result: 11.75 ft

Example inputs
Deck width
12 ft
Rim joist edges
Both edges
Rim joist thickness
1.5 in

FAQs

Does bearer set-in shorten the joist cut?

No. This formula subtracts only the selected actual rim thickness from the overall deck width.

Does this include a purchase allowance?

Only allowances shown in the inputs and formula are applied. If no waste, reserve, or package field is listed, the result does not infer one.

Does this make a complete construction or product plan?

No. It calculates the listed quantities from known inputs; it does not select structural dimensions, product compatibility, or code requirements.