Arched fence picket layout calculator

Fence / Layout

Lay out full-width pickets and individual blank lengths along a circular or explicitly selected parabolic rise or drop.

Enter your inputs

A worked project example is loaded and calculated automatically. Replace the values with your project inputs.

Input notes

Use the panel outside width and actual full picket width. The arch chord runs between end-board centers, not outside panel edges. End picket length is the apex blank length; rise/drop is measured at the curve center. Circular rise is limited to 40% of this chord in the current model. A center peak between two boards can differ from the longest actual picket. Parabolic mode uses a separate declared geometry.

in
Enter panel width in inches.
in
Enter picket width in inches.
in
Enter end picket length in inches.
in
Enter arch rise or drop in inches.
Choose the option that matches your project.
Choose the option that matches your project.
Choose the option that matches your project.
pickets
Use a whole number.

About this calculator

Arch layout spaces full-width pickets across a panel and calculates each blank length from the selected circle or parabola, rise/drop, and direction.

Steps

  1. Panel width

    Enter panel width in inches.

  2. Picket width

    Enter picket width in inches.

  3. End picket length

    Enter end picket length in inches.

  4. Arch rise or drop

    Enter arch rise or drop in inches.

  5. Arch direction

    Choose the option that matches your project.

  6. Arch shape

    Choose the option that matches your project.

  7. Picket count input

    Choose the option that matches your project.

  8. Known picket count

    Use a whole number.

  9. Maximum clear gap (available in another mode)

    Enter maximum clear gap in inches.

Formula

Gap = (panel width − count × picket width) ÷ (count − 1). The arch chord joins the centers of the end boards and equals panel width − picket width. Circular radius R = chord² ÷ (8 × rise) + rise ÷ 2; each length = end-board height ± (sqrt(R² − x²) − sqrt(R² − (chord/2)²)), where x is the picket center’s distance from the center of the arch. Parabolic mode uses rise × (1 − (2x/chord)²). Zero rise is flat. Board-top style does not change these apex blank lengths.

Notation: sqrt gives the square root.

Interpret the result

Blank lengths describe the selected curve geometry before decorative cuts and kerf. With an even count, the curve extreme can fall between pickets.

Worked example

For a 52-in panel with nine 4-in pickets, clear gap = (52 − 9×4) ÷ 8 = 2 in. The 48-in end-board center chord and 8-in circular rise give radius 48² ÷ (8×8) + 8÷2 = 40 in; the center blank is 56 in.

Example result: 9 pickets

Example inputs
Panel width
52 in
Picket width
4 in
End picket length
48 in
Arch rise or drop
8 in
Arch direction
Rise at center
Arch shape
Circular source geometry
Picket count input
Known full-picket count
Known picket count
9 pickets

FAQs

Does an even picket count have a center picket?

No. The curve extreme may lie between two boards, and the calculation reports actual blanks separately.

What do the layout marks refer to?

Use the stated origin, centerline or face reference, and units shown with the result. Display rounding may differ from the internal coordinates.

Does this approve the selected dimensions or product?

No. It lays out the dimensions you enter and does not establish structural capacity, product cutting permission, or installation compliance.

Additional examples and limits

Circular picket lengths and blank dimensions

For a 52-in panel, nine 4-in pickets, 48-in end blank lengths and an 8-in rise: the clear gap is (52 − 9 × 4) ÷ 8 = 2 in. The end-board center span is 48 in; the radius is 48² ÷ (8 × 8) + 8 ÷ 2 = 40 in. The middle blank is 56 in long and the end blanks remain 48 in. Drop mode makes the middle 40 in. With an even count, the curve extreme lies between boards and is reported separately.

Maximum-gap mode finds the fewest full-width pickets meeting the entered clear gap, rejecting overlap or a width that cannot be filled by full boards. Zero rise produces a flat layout; a single full-width board is accepted only with zero rise. Counts above 500, a nonpositive drop height and circular rise above 40% of the chord are rejected. The parabolic alternative is labeled explicitly. Rectangular blank area is not the finished area after decorative top cuts; square, dog-ear, triangular, round or gothic finishing details and saw kerf are excluded. No product or structural suitability is established.