Fence stain quantity calculator

Fence / Maintenance

Estimate stain for a total run or up to ten equal-height fence runs.

Enter your inputs

A worked project example is loaded and calculated automatically. Replace the values with your project inputs.

Choose the option that matches your project.
ft
Enter total fence run length in feet.
ft
Enter fence height in feet.
faces
Use a whole number.
coats
Use a whole number.
sq ft / gallon
Use the coverage stated for your coating product in square feet per gallon.
Limits and notes

Enter only runs to be coated. Exclude uncoated openings; count a coated gate once at the same height. Use separate calculations for different heights. This is gross face area without picket edges or profile adjustments. Use coverage from your chosen product; gallons are unrounded volume, not whole-container purchase quantities.

About this calculator

Fence coating area is the sum of entered run lengths times the shared height and face count; coverage and coats convert that area to gallons.

Steps

  1. Run input

    Choose the option that matches your project.

  2. Total fence run length

    Enter total fence run length in feet.

  3. Segment lengths (available in another mode)

    Enter up to 10 positive run lengths in feet, separated by commas or newlines. All runs use the fence height and face count below.

  4. Fence height

    Enter fence height in feet.

  5. Faces to coat

    Use a whole number.

  6. Number of coats

    Use a whole number.

  7. Product coverage

    Use the coverage stated for your coating product in square feet per gallon.

Formula

gross face area = sum of run lengths × common height × faces; gallons per coat = area ÷ entered coverage; total gallons = gallons per coat × coats

Interpret the result

Only the entered faces and coats are included. Use the product coverage and enter openings or gates according to the surfaces actually being coated.

Worked example

A 100-ft run × 6-ft height × 2 faces = 1,200 sq ft. At 300 sq ft per gallon and one coat, 1,200 ÷ 300 = 4 gallons.

Example result: 4 gallons

Example inputs
Run input
Known total length
Total fence run length
100 ft
Fence height
6 ft
Faces to coat
2 faces
Number of coats
1 coats
Product coverage
300 sq ft / gallon

FAQs

How are multiple fence runs combined?

Enter the separate run lengths; the calculator applies their sum to the shared height and face count.

How is the coating quantity calculated?

The calculator uses the entered surface areas, product coverage, and number of coats. It does not infer hidden faces, edges, or extra coats.

Does the result round to full containers?

The displayed gallon result follows the calculator formula. Check the product package size and apply any purchase rounding separately.

Additional examples and limits

Multiple fence runs

For 40-ft, 35-ft and 25-ft runs at a common 6-ft height: (40 + 35 + 25) × 6 = 600 sq ft on one face. Two faces give 1,200 sq ft. At an entered 300 sq ft per gallon, that is 4 gallons per coat and 8 gallons for two coats. Coverage is an arithmetic example, not a universal product rate.

One 50-ft run at 6 ft high, one face and an entered 300 sq ft per gallon uses exactly 1 gallon per coat. A zero-length entry, an empty item, a non-number or more than ten runs is rejected. Different heights require separate calculations. Include painted gate surfaces once and leave unpainted openings out of the entered runs.