Deck stain quantity calculator

Deck / Maintenance

Estimate deck stain with measured areas or stair tread and riser dimensions.

Enter your inputs

A worked project example is loaded and calculated automatically. Replace the values with your project inputs.

sq ft
Enter deck surface area in square feet.
sq ft
Enter railing surface area in square feet.
Choose the option that matches your project.
sq ft
Enter stair surface area in square feet.
coats
Use a whole number.
sq ft / gallon
Use the coverage stated for your coating product in square feet per gallon.
Limits and notes

Enter the deck and railing surface areas separately. For stairs, use a known area or enter counts of exposed tread tops and riser fronts to coat. Counts can differ; use zero to omit a surface. All entered stairs share one width and the selected dimensions. Counted tread/riser faces do not include stringers, undersides, edges, trim or posts. This estimates coating area, not a stair design.

About this calculator

Coating quantity divides the entered deck, railing, and stair surface area by the selected product coverage, then multiplies by coat count.

Steps

  1. Deck surface area

    Enter deck surface area in square feet.

  2. Railing surface area

    Enter railing surface area in square feet.

  3. Stair area input

    Choose the option that matches your project.

  4. Stair surface area

    Enter stair surface area in square feet.

  5. Treads to coat (available in another mode)

    Use a whole number.

  6. Risers to coat (available in another mode)

    Use a whole number.

  7. Stair width (available in another mode)

    Enter stair width in feet.

  8. Tread depth (available in another mode)

    Enter tread depth in inches.

  9. Riser height (available in another mode)

    Enter riser height in inches.

  10. Number of coats

    Use a whole number.

  11. Product coverage

    Use the coverage stated for your coating product in square feet per gallon.

Formula

stair area = stair width × (coated tread count × tread depth + coated riser count × riser height), converting inches to feet; total area = entered deck + railing + stair area; gallons per coat = total area ÷ coverage; total gallons = per-coat × coats

Interpret the result

Gallons per coat and total gallons remain separate. Coverage and the surfaces to coat are user inputs; this is not a whole-container purchase recommendation.

Worked example

The example has 200 sq ft of deck, no railing/stair area, 200 sq ft per gallon, and 2 coats: 200 ÷ 200 × 2 = 2 gallons.

Example result: 2 gallons

Example inputs
Deck surface area
200 sq ft
Railing surface area
0 sq ft
Stair area input
Known stair area
Stair surface area
0 sq ft
Number of coats
2 coats
Product coverage
200 sq ft / gallon

FAQs

How are stair faces included?

Choose measured stair area or enter the coated tread and riser dimensions shown in the form.

How is the coating quantity calculated?

The calculator uses the entered surface areas, product coverage, and number of coats. It does not infer hidden faces, edges, or extra coats.

Does the result round to full containers?

The displayed gallon result follows the calculator formula. Check the product package size and apply any purchase rounding separately.

Additional examples and limits

Gallons per coat and total

For 200 sq ft of deck surface, 100 sq ft of railing and 50 sq ft of stairs, the entered total is 350 sq ft. At an entered 175 sq ft per gallon, that is 2 gallons per coat and 6 gallons for three coats. These are arithmetic example inputs; use your measured exposed surface areas and the coverage for the product you will apply.

Stair dimensions to coated area

Four tread tops, 3.5 ft wide and 12 in deep, give 14 sq ft. Four riser fronts at that width and 7 in high add 8.167 sq ft. Stair area is 22.167 sq ft; with 200 sq ft of deck and no railing area, total area is 222.167 sq ft. At an entered 200 sq ft per gallon, two coats use 2.22 gallons, rounded for display.

Omitting risers gives 214 sq ft including the deck, or 2.14 gallons for two coats. Zero tread and riser counts omit stairs. The counts are independent; unequal sizes need a separately measured total. Include only the surfaces to coat and do not add the same stair area again. Coverage and dimensions are arithmetic examples, not product or code recommendations.